Cordierite Mullite T Supports

Introduction:
T-pieces and T-cranks are designed to support the ware at three points around the foot during the firing. By using this product, you can achieve maximum support with the minimum amount of refractory material.The "T" cranks have a straight cross-section and fixed legs. The cranks are stacked on the kiln car, and the wares to be fired can be placed directly on the cranks without moving the kiln furniture.
T-pieces are designed to be placed in bungs upon kiln cars and ware can be loaded directly into the
bung without moving.

Features:
1.High corrosion-resistance.
2. Stable structure.
3. Good stability.
4.Good thermal shock resistance.

Application:
It is widely used as high temperature kiln furniture for daily porcelain

Technical Data:
T pieces and spacer legs

Description			Max. Ware Dia (mm)		Foot Diameter(mm)
					Max		Min
Saucer Tee                          IP 15N              5"Standard Slot                  TP17S               5"Narrow Slot                     TP17N                    6"Standard Slot                  TP20S 7"Standard Slot                  TP23S              7"Narrow Slot                    TP23N                     9"Standard Slot                  TP 27S 10"Standard Slot                 TP24S 10"Standard Slot                 TP 30S 10"Narrow Slot                    IP30N Dish Tee Standard Slot T     TP 39S Dish Tee Narrow Slot           TP 39N			145 170 170 200 230 230 275 240 300 300 390 390		100 120 130 140 160 175 200 195 230 200 260 260		- 30 30 25 40 35 70 18 65 45 105 105
AVAILABLE    BASE    LEGS(25MM    SQUARE) 'T-pieces do not have integral legs, but are complemented by a range of leg sizes to enable the optimum separation to be achieved between cranks.
Description	Leg Height (mm)	Description		Leg Height (mm)		Description		Leg Height (m m)
TPL 25 TPL 30 TPL 32 TPL 34 TPL 35 TPL 38 TPL 41	25 30 32 34 35 38 41	TPL 42 TPL 45 IPL48 TPL 52 TPL 54 TPL 57 TPL 65		42 45 48 52 54 57 65		TPL 70 TPL 85 TPL 90		70 85 90
						Base Legs
						TPL 17 TPL 22		17 22

  
T cranks with legs

Description		Leg Type	Max. Ware Dia	Foot Diameter		Leg Height (mm)	Placing Height  (mm)
				Max	Min
4"X553   5"CCS   5"X554   5"X551   5”X546   5"X552   7"Low   7"Med   7"Len   7"Tall   7"X557   7"X547   8"X558   9"Flat   9"Low   9"Med   9"Len   9”X559   9”9935   10"X548   10"X567   10"Flat   10"Low   10"Len   10"Tall   10”X560   10"X566   11”9934   12"X550   12"X565   12”9933   14"X561	(TC10/25)    (TC13/25)    (TC14/19)    (TC14/24)    (TC16/44)    (TC16/33)    (IC18/28)    (TC18/33)    (TC18/44)    (TC18/54)    (TC18/22)    (TC21/51)    (TC22/24)    (IC23/25)    (TC23/31)    (TC23/44)    (TC23/50)    (TC25/27)    (1C25/55)    (TC26/45)    (TC26/50)    (TC28/25)    (TC28/32)    (TC28/44)    (TC28/70)    (IC29/25)    (TC29/30)    (TC31/40)    (TC31/44)    (TC31/62)    (TC35/80)    (TC37/66)	U H U H H U H H H H U H U H H H H U H H H H H H H U U H H U H H	102 130 140 140 160 165 180 180 180 180 185 210 220 230 230 230 230 250 250 265 265 280 280 280 280 295 295 310 310 310 350 375	92 95 105 102 150 114 150 150 140 150 120 155 150 150 210 215 150 200 180 190 120 175 175 210 175 240 240 250 220 125 285 250	- - - - 40 40 - - 45 - - 90 100 - - - 55 120 - 100 - - - 95 - 130 130 - 120 90 - 140	35 36 29 35 54 44 38 43 56 64 33 62 36 34 41 54 60 38 67 55 64 37 44 56 83 36 42 52 55 75 92 80	25 25 19 24 44 33 28 33 44 54 22 51 24 25 31 44 50 27 55 45 50 25 32 44 70 25 30 40 44 62 80 66