Cordierite Mullite Uprights

Introduction:
The pin holder uprights are available in a variety of hole diameters and pin angles to adapt to the shapes of different wares and ensure maximum utilization of the kiln and energy, while minimizing the contact area between the pins and the wares.
The rack pin holder upright is perfectly equipped with 10mm (3/8”), 6mm (1/4”) or 5mm (3/16”) ceramic rack pins to adapt to wares of different weights.
We can provide different length options to suit the general spacing between kiln cars and shed boards.
The wedge-shaped ends are designed to fit snugly into all bases and caps, providing a highly stable structure in even the most rigorous firing environments.

Features:
1.High corrosion-resistance.
2. High mechanical strength.
3. Good stability.
4. Longer service time.

Application:
The rim support pin crank system has been designed to give a high stability,long life, and minimum refractory to ware ratio.

Technical Data:
 

Reference	No.of Holes	Height (mm)	Pitch (mm)	Width (mm)	Hole Angle	Reference	No.of Holes	Height (mm)	Pitch  (mm)	Width (mm)	Hole Angle
PIN UPRIGHTS FOR 5mm((³/16") PINS						PIN UPRIGHTS FOR 6mm(¼”)PINS
IPU15200 IPU13700 IPU17900 IPU14400* IPU14500 IPU07900 IPU13400 IPU12700* IPU00100 IPU00200 PU02400 X070352 X070359 IPU01000 IPU01300 IPU01600 IPU13300 IPU02700 IPU01400* IPU06800 IPU02900 IPU02100 IPU11700* IPU03300	14 19 14 14 12 14 12 9 17 14 12 9 12 14 10 10 12 15 9 10 8 10 9 8	392 364 275 274 274 273 272 272 272 272 272 271 271 271 270 268 267 262 223 222 208 205 185 170	24.2 17.2 17.0 16.6 19.4 17.0 19.4 23.7 13.8 17.0 19.7 23.5 19.5 16.7 23.7 23.4 18.9 15.0 20.1 17.9 21.8 17.0 17.4 17.4	25.0 22.0 18.7 18.7 18.7 18.7 19.0 18.7 18.7 18.7 18.7 19.0 19.0 18.7 18.0 18.7 18.7 18.7 18.7 18.7 18.7 18.7 18.7 18.7	10° 17° 25° 17° 17° 17° 17° 10° 10° 10° 10° 10° 17° 17° 10° 17° 20° 10° 10° 17° 17° 10° 10° 10°	X070365 IPU13200 X070356 IPU05300 IPU02600 IPU00600 X070357 IPU15800 IPU01900 IPU14100* IPU15900 IPU02000 X070733	14  9  11  13  11  13  9  9  8  10  8  9  7	313 279 273 273 272 272 271 270 270 270 270 270 220	20.0  26.3  22.0  17.9  22.0  18.3  25.4  26.0  26.5  23.0  25.5  26.5  26.5	26.0  25.0  26.4  25.4  25.4  25.4  25.4  25.0  25.4  25.4  25.0  25.4  25.4	10° 17° 10° 17° 10° 10° 10° 17° 10° 17° 10° 10° 10°
						PIN UPRIGH TS FOR 10mm(³/8")PINS
						X070362* IPU11400* X070368*	7 7 6	272 270 220	35.0  34.9  31.0	25  25.4   25	17° 10° 17°